Products
Every Kind of Dirt, and a Few You Haven't Heard Of
Products — sand, select fill, clay, pinhole clay, common fill and topsoil — mined from pits all around Greater Houston. Delivery service provided by us.
Dirt isn't just dirt. The stuff that goes under a house slab is nothing like the stuff that grows grass. Pick the wrong one and you'll be fixing it later, which costs a lot more than getting it right today.
Jump to what you need, or scroll through. Still not sure? Call us. We've been doing this since 1982 and we like the easy questions.
Material
Select Fill
Select fill is the workhorse, and it's the one engineers ask for by name. Houston clay swells up when it rains and shrinks back when it doesn't, which is hard on anything built on top of it. Select fill is the low-drama replacement.
It packs down tight, it drains the way you expect, and it stays where you put it.
Intended use: replacing expansive Houston clay under anything that gets built on — building pads, road and parking lot base, and structural backfill.
Common uses
- Building pads
- Road and parking lot base
- Structural backfill
- Raising a low lot
- Pipeline and utility bedding
The spec sheet version: a low to medium plasticity index material used to replace the expansive clays common around Houston. Most select fill is qualified before and during placement by the project owner's soils engineer, job by job.
Material
Sand
Sand does more jobs on a site than almost anything else. Ours comes straight out of the ground — unwashed and unprocessed, mined from several pits around Greater Houston.
You'll hear it called two things depending on what it's doing. Bank sand is what goes under a water line. Final grade is the last smooth layer before sod or concrete goes down.
Intended use: bedding under water lines and utilities, and the final smooth grade before sod or concrete goes down.
Common uses
- Bedding water lines and utilities
- Smoothing a site before sod or concrete
- Concrete work and slab prep
- Leveling and grading
The spec sheet version: generally meets specifications where no more than 15% passes a #200 sieve, which keeps it relatively free of fine silts and clays.
Not sure what you need? Tell us what stage the job is at and we'll tell you what to order. No charge for the advice.
Material
Clay
Clay is the dense one. It packs hard and it doesn't let water through, which is the entire point. Ours is mined from several different pits, so it turns up in a range of colors and consistencies — tell us what the job needs and we'll pull from the right one.
Intended use: low-permeability fill where water has to stay on one side — detention pond and basin liners, levees and berms.
Common uses
- Detention pond and basin liners
- Levees and berms
- Erosion control
- Anywhere you want water to stay on one side
The spec sheet version: material is generally classified as clay once its plasticity index goes above 20. Specified where a cohesive soil is needed to limit water penetration or erosion.
Material
Common Fill
Common fill is the budget option, and there's no shame in it. It's fill with no specification to meet — usually a clay-type material, and what's in it varies from load to load.
That's exactly why it's cheap, and for a lot of jobs it's all you need.
Intended use: non-structural fill and rough site work where no specification has to be met and the material gets covered up later.
Common uses
- Filling holes
- Raising low spots
- Rough site work
- Anything that gets covered up later
The spec sheet version: any fill material that does not need to meet a certain specification. The most cost-effective product we sell.
The honest version: if something is going to be built on top of it, spend the extra on select fill. Filling a hole nobody will ever see? Common fill is your friend.
Material
Topsoil
Topsoil is the layer things actually grow in. Ours comes off the top 6 to 18 inches of natural ground, which is where all the organic material lives.
It's unscreened and unprocessed, so expect the occasional clay clod or small root. That's the trade you make for a soil with real organic content at a sensible price. If your job needs something cleaner, say so when you call and we'll talk it through.
Intended use: the growing layer for new lawns, garden beds and regrading a yard after construction.
Common uses
- New lawns
- Garden beds
- Regrading a yard after construction
- Filling low spots that hold water
A tip: order about 20% more than you think. Dirt settles. Our material calculator will do the arithmetic for you.
Homeowners welcome. You don't need to be a contractor to buy from us. One truckload for the backyard? Same number the big builders call.
Material
Pinhole Clay
Pinhole clay is clay that's been tested to hold water without washing out. It's named after the lab test it passes: water is pushed through a pinhole in a compacted sample, and if the hole doesn't grow and the water runs clear, the clay won't erode from the inside.
You use it anywhere water sits against the dirt and the dirt has to win.
Intended use: liners and embankments that have to hold water, where the specification calls for non-dispersive clay.
Common uses
- Detention and retention pond liners
- Levees, berms and dam cores
- Ditch and channel linings
The spec sheet version: clay that passes the pinhole dispersion test (ASTM D4647), so it won't erode from the inside when water finds a crack.
Questions
The ones we get asked most
Select fill is specified material — a low to medium plasticity blend that compacts to a predictable, stable base, and it's usually tested by the project's soils engineer as it goes in. Common fill has no specification to meet and varies load to load. If something is going to be built on top of it, use select fill.
Both. You don't need an account or a contractor's license to buy from us. One truckload for the backyard is the same phone number the large builders call.
Work out the cubic yards, then add about 10% for settling and compaction — 20% for topsoil. Our material calculator handles the arithmetic. Running short halfway through a job is a much worse problem than having a little left over.
No — our topsoil is unscreened and unprocessed, taken from the top 6 to 18 inches of natural ground. That keeps the organic content and the price sensible, but it does mean you may find the occasional clay clod or small root. Tell dispatch what the job is and they'll let you know whether it's the right pick.
Either. We run our own fleet and deliver across Greater Houston, and with pits all around the area the haul is usually shorter than you'd expect. You're also welcome to pick up at a pit — call ahead so we know you're coming.
Specifications
Specifications and samples
The material descriptions on this page are written in plain terms. Where a project specification names a published standard, those standards are issued by ASTM International — astm.org. Which designation applies to a given material is confirmed job by job with the project owner’s soils engineer.
Requesting a sample
Samples are available on request. Before a sample can be released:
- Approval is required before any sample leaves the pit.
- The lab technician completes the Lab Information Form.
- The technician collects their lab sample.
- The completed Lab Information Sheet must accompany the retained sample.
To start a sample request, send us the details or call Central Dispatch at 281-277-5404.
Still not sure what you need?
Tell us what you're building. We've been answering that question since 1982 and we like the easy ones.